We saw that equal gain combining and maximal ratio combining result in tremendous improvement in bit error rate performance in a Rayleigh fading channel. These are receive diversity schemes i.e. schemes that work with multiple receive antennas. Now let us turn our attention to schemes that work with multiple transmit antennas. We know that the main aim of a combining scheme is to coherently add the signals. If the same signal is transmitted from multiple transmit antennas the resulting signals would not add up coherently when they arrive at the receiver (remember that each path introduces a random phase shift). […]

We just saw the advantage an equal gain combiner (a combining scheme that just adds the signals after co-phasing them) provides in a Rayleigh fading channel. Lets now look at a variant of this scheme called maximal ratio combining (MRC). In MRC the signals arriving at the receivers are weighted by the channel gains i.e. a stronger signal is weighted more than a weaker signal before combining. It must be noted that in an actual system the received signals are both scaled and phase shifted thus an MRC receiver multiplies the received signals by the complex conjugate of the channel […]

When wireless signals travel from a single transmit antenna to multiple receive antennas they experience different fading conditions. While signal from one path may experience a deep fade the signal from another path may be stronger. Therefore selecting the stronger of the two signals (selection combining, threshold combining) or adding the signals (equal gain combining, maximal ratio combining) would always yield much better results (lower bit error rate). However, there must be sufficient spacing between the different receive antennas for the received signals to be dissimilar (uncorrelated). In the simulation below we consider a 1-Tx, 2-Rx scenario. The signals arriving […]