Antennas, LTE, Network Planning, WiMAX

Antenna Radiation Pattern and Antenna Tilt

An introductory text in Communication Theory would tell you that antennas radiate uniformly in all directions and the power received at a given distance ‘d’ is proportional to 1/(d)^2. Such an antenna is called an isotropic radiator. However, real world antennas are not isotropic radiators. They transmit energy in only those directions where it is needed. The Gain of a antenna is defined as the ratio of the power transmitted (or received) in a given direction to the power transmitted in that direction by an isotropic source and is expressed in dBi. Although antenna Gain is a three dimensional quantity, […]

Read more
Antennas, LTE, Network Planning, WiMAX

Base Station Antenna Tilt and Path Loss

Path loss is basically the difference in transmit and receive powers of a wireless communication link. In a Free Space Line of Sight (LOS) channel the path loss is defined as: L=20*log10(4*pi*d/lambda) where ‘d’ is the transmit receive separation and ‘lambda’ is the wavelength. It is also possible to include the antenna gains in the link budget calculation to find the end to end path loss (cable and connector losses may also be factored in). Antenna gains are usually defined along a horizontal plane and vertical plane passing through the center of the antenna. The antenna gain can then be […]

Read more
Network Planning, Random Thoughts

Qualcomm In Muddy Waters In India

Remember Qualcomm CEO Paul Jacobs proudly claiming that his company had prevented WiMAX from getting a hold in India by acquiring BWA licenses in four regions of India. Well now Qualcomm is in a bit of bother as the Department of Telecommunication (DoT) in India has raised objections to the license application filed by Qualcomm. According to news circulating on the internet the DoT has objected to Qualcomm filing four separate applications through its nominee companies in the four regions (Delhi, Mumbai, Kerala and Haryana) it had won the licenses on June 12, 2010. Secondly the DoT has also objected […]

Read more
Network Planning, WiMAX

WiMAX Path Loss and Antenna Height

As discussed previously the SUI (Stanford University Interim) model can be used to calculate the path loss of a WiMAX link. The SUI model is given as: SUI Path Loss Equation It has five components: 1. The free space path loss (A) up to the reference distance of ‘do’. 2. Additional path loss for distance ‘d’ with path loss exponent ‘n’. 3. Additional path loss (Xf) for frequencies above 2000 MHz. 4. Path gain (Xh) for receive antenna heights greater than 2 m. 5. Shadowing factor (s). The most important factor in this equation is the distance dependent path loss. […]

Read more
Channel Modeling, WiMAX

WiMAX Path Loss Calculation

Calculation of the path loss is fundamental to Wireless System Design. There are many models available for calculating the path loss such as Okumura Model, Hata Model, COST-231 Model and more recently the SUI (Stanford University Interim) Model. The SUI Model has been specifically proposed for Broadband Wireless Access Systems such as WiMAX. It defines three types of environments namely A, B and C which are equivalent to the urban, suburban and rural environments defined in the earlier models. According to this model the path loss can be calculated as: PL=A+10*n*log10(d/do)+Xf+Xh+s where n=a-(b*hb)+(c/hb) A=20*log10(4*pi*do/lambda) Xf=6.0*log10(f/2000) Xh=-10.8*log10(hr/2) for A&B Xh=-20.0*log10(hr/2) for […]

Read more
LTE, Network Planning

LTE Path Loss at 700 MHz

In the previous post we had compared the path loss of LTE at 728 MHz and 1805 MHz in a free space line of sight channel. This is a very simplistic channel model which tells us that ratio of the received signal strengths at these frequencies can be simply found as: (f1/f2)^2=(1805/728)^2=6.15 That is the received signal strength at 728 MHz is 6.15 times higher than the received signal strength at 1805 MHz. Now let us consider a more realistic channel model known as the COST-231 model. According to this model the path loss (difference between the transmit power and […]

Read more
LTE, Network Planning, WiMAX

Propagation and In-Building Penetration at 700MHz

It is quite well known that wireless signals travel further at lower frequencies. This phenomenon has become particularly important in the context of LTE where a frequency band has been allocated at 700MHz. We would like to quantify the benefits that can be achieved by using this frequency band. Firstly we find the received signal power at 728 MHz (lowest downlink frequency) and at 3600 MHz (highest downlink frequency) in a free space line of sight channel. The transmit power is set to 1 W and omnidirectional antennas are considered at the transmitter and receiver. The received power for these […]

Read more
HSPA, LTE, Network Planning

4G LTE Coverage within Virginia

Since our last post on Verizon LTE coverage within California, Verizon has removed the LTE Coverage Map from its site. Now it only gives a list of cities that have 4G LTE service (just like T-Mobile). So we now move from the West Coast to the East Coast i.e. Virginia. The state that is home to Virginia Tech, one of the finest schools in the country and a breeding ground for Wireless Engineers. It is thus somewhat of a shock to see that Verizon Wireless has no 4G LTE footprint in the state of Virginia. The only place that it […]

Read more